Well here I go again. Finished for now. 08/24/12

Fredericksburg · Posted: Tue Sep 06 11 10:06 pm Post subject:

Kevin; This is beginning to look like the learning channel with a fresh idea every time you post updates. Look forward to the next episode. Very nice, and well done.
_________________
Learn from the mistakes of others. You can never
live long enough to make them all yourself.

k.a.m. · Posted: Wed Sep 07 11 12:54 am Post subject:

Thank You GF, Very Happy

I like keeping scrap anything around for those occasions. Very Happy

Thank You msiegpt, Very Happy

I look forward to fallowing your progress. Very Happy

Thank you Mike, Very Happy

yesterday was a fine day to be burning rods. Very Happy

Thank You Denny, Very Happy

still a ways out Brother. Wink

Thank You Troy, Very Happy

The fit on the plates is very tight I am hoping it works as planned when I convert. Smile

Thank You dtel, Very Happy

The plate strap is something I have been pondering for some time. Smile

Thank You Fredericksburg, Very Happy

I am trying to keep the ideas flowing on this one. Very Happy

_________________
Always remember slow and steady wins the race.

Reverse Flow
Hybrid Cooker

GF · Posted: Wed Sep 07 11 1:34 am Post subject:

k.a.m., ain't no such thing as scrap brother. Very Happy

I tell my girl all the time when she gets on me about all my junk, it isn't junk, it is material waiting for a purpose. Wink

If I threw anything out, I'd be lookin for it a week later. Shocked

ckone · Posted: Wed Sep 07 11 1:58 am Post subject:

k.a.m. · Posted: Wed Sep 07 11 11:31 am Post subject:

Very true GF, I should have said drops instead. Very Happy

Now a days I find myself keeping 3" pieces for whatever. Laughing

Thank You ckone, Very Happy

I am hoping and praying y'all and the rest of the state get some relief real fast we need it.
_________________
Always remember slow and steady wins the race.

Reverse Flow
Hybrid Cooker

roscoe1960 · Posted: Wed Sep 07 11 2:05 pm Post subject:

k.a.m. everything is coming together very nice. Finally getting a break from the heat Very Happy

, can't ask for any better as for as the low's go but the highs could be about 10 or 15 degrees lower, that would make it perfect IMO.
_________________
I'm not 50 yrs. old I'm 21 with 29 yrs. experience.
http://thesmokering.com/forum/viewtopic.php?t=38513

erniesshop · Posted: Wed Sep 07 11 11:21 pm Post subject:

Kevin.....I really like the Idea of having Tuning Plates AND a Reverse Flow !!

k.a.m. · Posted: Thu Sep 08 11 1:13 am Post subject:

Thank You roscoe1960, Very Happy

I figure we are not far from the cooler temps. Smile

Thank you Ernie, Very Happy

I hope it works as planned. Smile

This evening I got the warming chamber up and on the firebox. First I cut out the hole on the cooking chamber then set the box to align it up. Once this was done I marked the warming chamber hole and cut it out.

Got her snugged up for marking.

Ready to mark the second cut and move for cutting.

The warming camber back in place and tacked down.

The hole size is 6" wide x 5" tall.

_________________
Always remember slow and steady wins the race.

Reverse Flow
Hybrid Cooker

cody · Posted: Thu Sep 08 11 3:49 am Post subject:

now your getting some work done Laughing

_________________
You know with the way this country is heading, I'm surprised the voices in my head haven't asked me to press 1 for English

k.a.m. · Posted: Thu Sep 08 11 11:16 am Post subject:

icecoldkicks · Posted: Thu Sep 08 11 10:10 pm Post subject:

SWEET, L@@Kn Good KAM!!! Cool

_________________
287Gal RF Project

Slow & Low, That is the Tempo!!

GF · Posted: Fri Sep 09 11 1:03 am Post subject:

k.a.m., now that it cooled of a little you are really moving. Very Happy

Looking good.

TrailerBuilder · Posted: Fri Sep 09 11 1:36 am Post subject:

Looks good Kevin, starting to make some nice progress now. Amazing what 30 degrees cooler can do for a man. Ill keep checking back for more updates Very Happy

_________________
Trailers By Troy

X2 Finished Build
Disco Time

cody · Posted: Fri Sep 09 11 2:50 am Post subject:

Wreckless · Posted: Fri Sep 09 11 10:20 am Post subject:

"Keeping up with the Joneses" is sooo not applicable in this arena. "k.a.m. culture" is the happening here. Cool

First it was sealing the doors for a tight cooker. Now we're sealing tuning plates. Rolling Eyes

You're raising the bar just to achieve half-assed bro. So much for BS'n the way thru bling. Great idea on the plates Kevin. I like it too much. Very Happy

_________________

k.a.m. · Posted: Fri Sep 09 11 11:20 am Post subject:

Thank You icecoldkicks.

Thank You GF. Very Happy

Thank You Troy. Very Happy

Thank You Cody, Very Happy

Have fun at the lease and Good Luck. I am going to Houston. Cool

Thank You Mike, Very Happy

I hope it works as planned I think it will. Wink

_________________
Always remember slow and steady wins the race.

Reverse Flow
Hybrid Cooker

ClydeDale · Posted: Sat Sep 10 11 4:42 am Post subject:

K.a.m not only do you raise the bar you reinvent the bar with each of your builds....great job!!

k.a.m. · Posted: Sat Sep 10 11 11:49 am Post subject:

Thank You ClydeDale. Very Happy

_________________
Always remember slow and steady wins the race.

Reverse Flow
Hybrid Cooker

Blazer · Posted: Sat Sep 10 11 1:26 pm Post subject:

K.A.M .....wow The attn. to detail says alot. Wish i was there. But i'd have to bring b'lite cant handle ole mill. Hope the fires down there stop. Wish we could give you some of the rain we ben having.

Hotdog · BBQ Fan Joined: 02 Jul 2007 Posts: 247 Location: Kansas

WOW...... EXCELLENT job!

Dear Lord, why can't I have a neighboor like Kevin??
_________________
I have some "wants" but NO "needs"...
So I consider myself a rich man...