Welding table upgrades

ckone · Posted: Tue Dec 07 10 6:23 pm Post subject: Welding table upgrades

So i made myself a welding table the other day, and had some time to kill today so i made a few upgrades to it. Added a hanger for the chipping hammer, and a rack to hold my grinders. Also added the remote ground tab.

Now that the table is organized, maybe I should so the rest of the garage.

Real problem is I don't have any place to put most of it. I might have to many toys. Wink

_________________
22.5 Weber Kettle
Homemade back yard DP clone
The Bubba Keg
Work's trailer mounted 250gal off set

alt248 = °symbol, thanks cityevader.

killswitch505 · Posted: Tue Dec 07 10 6:37 pm Post subject:

like the table!!!! but why and the hell don't you have those mounts on a wall if its the wife send her packin head belong on a wall not in the garage lol
_________________
Club Disco

ckone · Posted: Tue Dec 07 10 6:43 pm Post subject:

k.a.m. · Posted: Wed Dec 08 10 12:48 am Post subject:

I like the table very nice work. Very Happy

You need some casters so you can roll it around.
_________________
Always remember slow and steady wins the race.

Reverse Flow
Hybrid Cooker

ckone · Posted: Wed Dec 08 10 1:20 am Post subject:

Stacked smoker · Newbie Joined: 15 Sep 2010 Posts: 95 Location: St. Paul MN

If you put a turnbuckle on one end you could adjust the height. Like a third member on a three point hitch. Just a thought.
_________________
Keep on Rolling Smoke
R1536 Reverse flow smoker by Calebs Customs
The "bomb shelter" Home built reverse flow
Lang 84 deluxe
Twin stacked reverse flow cheese smoker
Weber grill

Jonnyrod · Posted: Wed Dec 08 10 2:53 am Post subject:

I like, it's nice having a place to put stuff under the table out of the way. Very Happy

_________________
http://www.thesmokering.com/forum/viewtopic.php?t=42423

http://www.thesmokering.com/forum/viewtopic.php?t=62257

'A welder is only as good as his last weld'........

DesertPits · Newbie Joined: 04 May 2010 Posts: 71 Location: SoCal

If you organize the rest of the garage.....you won't be able to find anything. LOL

Mike

ggarner · Posted: Wed Dec 08 10 5:25 am Post subject:

Maniac · BBQ Super Pro Joined: 01 Oct 2010 Posts: 1269 Location: Pa

real nice...i like the way every thing hangs less time looking for it Smile

i made a welding table for a friend and built it with 3 legs always stable..
_________________
RF Smoker
20" disc
uds

Maniac · BBQ Super Pro Joined: 01 Oct 2010 Posts: 1269 Location: Pa

just relooked at your table and it was a tripod Laughing

all you have to do to fix the shim problem is weld a 1/2 inch rod coupling to each side of your rectangle tube and put a capscrew thru it and snug it to the ground and when you move it just adjust accordingly .....we weld a rod coupling to all our pipe stands for fine tuning pipe layout hope this helps
_________________
RF Smoker
20" disc
uds

SoEzzy · Posted: Thu Dec 09 10 4:23 am Post subject:

k.a.m. · Posted: Thu Dec 09 10 12:00 pm Post subject:

strengthand power · Joined: 16 Oct 2009 Posts: 17

[img]http://www.millerwelds.com/resources/communities/mboard/attachment.php?attachmentid=21498&d=1267336902[/img]

here is the table I built and use on an almost daily basis

k.a.m. · Posted: Mon Dec 13 10 12:47 pm Post subject:

Here ya go strengthand power. Very nice table. Very Happy

_________________
Always remember slow and steady wins the race.

Reverse Flow
Hybrid Cooker

ckone · Posted: Mon Dec 13 10 5:23 pm Post subject:

That is a nice table. If I had money that would be what i had, but I don't so I used a bunch of stuff that I had. Wink

_________________
22.5 Weber Kettle
Homemade back yard DP clone
The Bubba Keg
Work's trailer mounted 250gal off set

alt248 = °symbol, thanks cityevader.

strengthand power · Joined: 16 Oct 2009 Posts: 17

Thanks K.A.M. it was a lot of fun building it upside down and then flipping it over with a chain hoist. If i ever get some free time, i will be using it to build a smoker