food grate framing

WhiteHawk · Joined: 09 Feb 2010 Posts: 14 Location: moxee, wa

I was wondering what would be best to use angle iron or square tube to make a frame around expanded metal? Need to frame my food grate for heavier meats.

Thanks for any and all info. Its a nee braunsfeld offset smoker one piece expanded metal for the food chamber.

jess · Posted: Sat Jun 02 18 6:44 pm Post subject:

This has been quite a debate here in the past. Myself I use 1/8"x1x1 tube with a center brace of the same on anything 30" or more...

WhiteHawk · Joined: 09 Feb 2010 Posts: 14 Location: moxee, wa

Thanks i much appreciate it. Gonna pick up some square tubing than.

AnhartGeorge · Joined: 23 Aug 2018 Posts: 8 Location: Tampa, Florida

Thanks for the tip! Will be taking note of this.